What You Need When Removing Mold

A lot of people dream of purchasing a home that is a “fixer-upper”, but many are wary about purchasing homes that are contaminated with mold in different areas. Depending on how old the home is, what condition it is in structurally, and where it is located, it may be feasible to attempt to remediate the home yourself on top of the normal remodeling that you are going to have to do. When you have to remodel a home due to cosmetic issues, a lot of the time you have to remove building materials, anyway, so why not go the extra mile and remove the mold from the home?

Professional remediation can be expensive, but if you know what you are doing and know what equipment you will need to take up the job and complete it successfully, you could have a gem of a house in not a large amount of time.

If you do choose to remediate the home yourself instead of hiring a professional, you might want to know what you will need to do it. Hiring someone to at least assess the remediation needs of the home is advised. Some heavy duty chemicals that will kill the mold will be necessary if it is growing on non-porous surfaces like tile. Almost anything else that is contaminated by mold, such as drywall, will have to be removed and replaced. Remove any and everything from the home with mold on it; do not let it come into contact with new building materials that you have purchased.

Heavy duty trash bags and a vacuum cleaner with a HEPA filter system on it are recommended. The vacuum will remove any mold spores from the floor after the remediation job is done with.

Respirators are a must when taking on a mold remediation job. Even if the infection is not that severe, breathing mold spores is still a hazard to your health and many problems can arise. You may be allergic and not even know it. Purchase a good quality respirator if you plan on taking out any drywall or old wood. Protective clothing so the spores do not get on your skin is also a good idea. Purchase a roll of duct tape to seal the gaps between your protective suit and your shoes. Disposable protective clothing for mold remediation is available and it not very expensive. The most expensive piece of equipment you will need is the respirator and there is no reason to skimp on that part.



Jim Corkern is a writer and promoter of quality
Miami Residential Water Damage Restoration Contractors and
Orlando water Damage companies.

Cleaning Out the Fridge to Prevent Mold

With the obsession that many households in the United States have with food, one would think that we would remember to keep our refrigerators cleaned a lot more often than we do. Many of us have families to take care of and jobs to tend so, so maybe it is because we just do not have time to take care of this necessary chore like we used to or perhaps we think that the problem is not as bad as we are supposed to think it is. Most people realize that bacteria and mold can grow in the refrigerator almost as easily as outside it because of the large amount of food we keep inside it and a lot of the time our food is improperly stored, which opens it to contamination even further than normal. To keep a healthy kitchen, you need to clean out your refrigerator often; clean it out completely at least once every three or four months and here is how you can start.

Remove everything from the fridge, including from the doors, and set it aside wherever you are comfortable with leaving it. The best place is on the kitchen or dining room table or just your kitchen counters. If you do not have room, set things on a table somewhere, as leaving them in the floor is not exactly practical, especially if your floor is not clean.

Take every removable part of your fridge out and set them in a sink of hot water. If you are putting glass shelves in it, rinse them with warm water first to make sure the sudden temperature change does not crack the glass. This water should also contain plenty of antibacterial soap. Allow these to soak a few minutes, especially if they have any sticky residue like from jelly or syrup.

Start washing out the inside of the refrigerator with a rag or a sponge. Use a warm bowl of water and a spray bottle of whatever chemical you have chosen for this job. You can use bleach, but do not mix it with other household chemicals that you might have on hand and always wear rubber gloves. Make sure to get any food that is stuck onto the surface of the refrigerator off before you start putting things back.

When you are done cleaning the inside and done washing the removable shelves and racks, start putting them back. Then, go through the items that you took out and throw out anything that is stale, spoiled, or contaminated with mold.


Jim Corkern is a writer and promoter of quality
Miami Residential Water Damage Restoration Contractors and
Orlando water Damage companies.